Waveshare 23949 USB To RS485/422 Isolated Converter, FT232RL And SP485EEN
Waveshare 23949 USB To RS485/422 Isolated Converter, FT232RL And SP485EEN
Em estoque.
Não foi possível carregar a disponibilidade de retirada.
Shipping Methods
Shipping Methods
To find out all available shipping methods, and the exact delivery time add the product to the cart, and verify it using our shipping calculator.
Garantia de envio
Garantia de envio
Frete grátis em todas as encomendas. Totalmente segurado.
Tempo de manuseio: 1 a 3 dias úteis. (Onkiza deve processar seu pedido e submeter todos os seus itens a rigorosos testes de controle de qualidade.)
Tempo de trânsito: 3 a 15 dias úteis.
Garantia de devolução
Garantia de devolução
Por qualquer motivo, se você não estiver satisfeito com seu pedido dentro de 7 dias, você pode devolvê-lo em novas condições e receber um reembolso menos as despesas de envio.
Garantia DOA
Garantia DOA
Se o seu item chegar danificado, entre em contato conosco dentro de 7 dias e forneça uma prova clara e válida. Onkiza fará uma indenização com base na situação do dano.
Garantia de itens faltantes/errados
Garantia de itens faltantes/errados
Se você receber um pacote com itens de embalagem ausentes/incorretos/secundários, entre em contato conosco dentro de 7 dias após a entrega e forneça o comprovante relevante. Onkiza fará uma indenização com base na situação do dano.
Features:
1. Onboard original FT232RL and SP485EEN chips; fast communication speed, stable and reliable, better compatibility
2. On-board integrated power isolation, providing stable isolation voltage, no additional power supply is required at the isolation end
3. Onboard integrated digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
4. Onboard TVS (Transient Voltage Suppressor), effectively suppressing surge voltage and transient peak voltage in the circuit, lightning protection and anti-static
5. On-board self-recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection, and improve impact resistance
6. Onboard 15KV ESD isolation protection and 600W lightning surge protection
7. The RS485/RS422 interface has a 120R terminal resistor on board, which is enabled by default and can be configured by jumpers
8. 3 LEDs to indicate power and transceiver status
9. Industrial-grade rail-type ABS shell design, small size, easy installation, high cost performance
Product parameters:
1. Baud rate: FT232RNL (300bps-3Mbps)
2. Host port: USB
3. Device port: RS485/422
4. Working voltage: 5V
5. Connector: USB-B
6. Protection: 200mA resettable fuse, ESD protection
7. Transmission distance: about 5m
8. Connector: screw terminal
9. Pins: A+, B-, PE
10. Direction control: hardware automatic control
11. Protection: 600W lightning protection surge suppression, 15KV ESD protection (120R balance resistor on board)
12. Transmission distance: about 1.2km (low speed)
13. Transmission method: point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
14. LED indicator light: PWR: red power indicator light, it is on when there is a USB connection and voltage is detected; TXD: green TX indicator light, it is on when the USB port sends data; RXD: blue RX indicator light, when the device port sends data back lights up
15. Working environment temperature: minus 15-70 degrees Celsius
16. Humidity: 5%-95% RH
17. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
18. Shell: rail type ABS shell, suitable for 35mm DIN rail
19. Product size: 81.9 × 54.0 × 32.0mm
20. Weight: 104 grams
Packing list:
-USB to RS485/422 x 1
-1.2mUSB-A to USB-B cable x 1
-Screwdriver x 1
Compartilhar
